In chicken farms that generally use flat or online farming, the water line and feed line of chicken equipment are basic and important equipment, so if there is a problem with the water line and feed line of the chicken farm, it will threaten the healthy growth of the chicken flock.
Therefore, farmers must use the feeding line equipment reasonably and scientifically, and solve them in time when there is a fault. The following chicken equipment manufacturer Dajia Machinery will talk about the common fault solutions of the water line feeding line.
Common fault 1: Feed line motor does not work: After this fault occurs, to check whether the motor is burnt, you can remove the power line above the motor from the control cabinet, connect it to the main power supply separately, and check whether the motor is running. If it is running, it means that it is a problem in the control cabinet.
You can check whether the contactor in the control cabinet is working normally and whether the line contacts are loose. If the motor does not run, check whether the wire is broken. If it is determined that the wire is intact, this proves that it is If there is a problem with the motor, the motor needs to be repaired.
Common fault 2: water line feed line auger problem: remember that the feed line auger cannot be reversed. If it runs in reverse, the auger will be twisted off or the auger will be pushed out of the material tube.
If the auger breaks, the user should contact the manufacturer to quickly replace or weld the material wire auger.
Common fault 3: Water feed line lifting system problem: The lifting system plays a key role in the entire water line feeding line equipment.
If there is a problem with the lifting system, the feeding line will not be able to be lifted to the proper height, which will affect the feeding of chickens.
Post time: May-18-2022
